Search

差别

这里会显示出您选择的修订版和当前版本之间的差别。

到此差别页面的链接

技术细节:电泳显示器 [2022/04/26 10:38]
baolitoumu 创建
— (当前版本)
行 1: 行 1:
  
-**Electrophoretic displays** (EPDs) like the one used on the reMarkable are arrays of cells, each one containing charged black and white particles. Unlike traditional displays, one cannot directly set the intensity of a given cell. Instead, the EPD controller (EPDC) can either apply a positive charge to a cell to move its black particles to the top or a negative charge to move its white particles to the top. By alternating between the two charges, one can create a mix of both particle types to form the desired shade of gray. 
- 
-[[https://en.wikipedia.org/wiki/Electronic_paper|Wikipedia: Electronic paper]] 
- 
-{{ :tech:e-ink.png | Schematic representation of an EPD cross-section }} 
- 
-===== Waveforms ===== 
- 
-A //waveform// is a timed sequence of commands sent to the controller to transition a cell from a given shade of gray to another. There is a trade-off between time and fidelity here: to make a cell have precisely the right shade, we usually need to have a longer waveform, but in some scenarios we don’t really care about the precise shade and just want fast updates, i.e. shorter waveforms (for example, when drawing on the rM). The waveforms also need to change depending on the ambient temperature, because of the chemical properties of the display. Look-up tables contain the right waveform to apply in each of these scenarios. On rM2, those look-up tables are stored in *.wbf files in ''/usr/share/remarkable''. 
- 
-===== Modes ===== 
- 
-//TODO// 
- 
-===== Drivers ===== 
- 
-[[https://essentialscrap.com/eink/|Driving E-ink displays]] 

Page Tools

Site Tools

User Tools